鈴木義和のホームページ: エネルギーセラミックス材料の研究開発

Updated on November 16, 2021
(A) Papers / Review articles on Journals
Web of Science Researcher ID: N-3525-2015 (h-index 33)
Publication
status
IF2020 Citation
Nov.
2021
162. T. Nakajima, H. Abe, Y. Suzuki, "Effect of transition metal oxides addition on the color tone of Bi4V2O11-based red pigments," J. Ceram. Soc. Jpn., accepted accepted 1.224 N/A
161. K. Fukushima, T. S. Suzuki, C. E. Ozbilgin, K. Kobayashi, H. Abe, Y, Suzuki, "pH-controlled synthesis and spark plasma sintering of fine and homogeneous MgZr4(PO4)6 powder," J. Ceram. Soc. Jpn., accepted accepted 1.224 N/A
160. A. Taniguchi, Y. Kubota, N. Matsushita, K. Ishii, T. K. N. Nguyen, T. Uchikoshi and Y. Suzuki, "Sequenced Successive Ionic Layer Adsorption and Reaction for Rational Design of Ni(OH)2/FeOOH Heterostructures with Tailored Catalytic Properties," ACS Appl. Energy Mater., 4 [8] 8252-8261 (2021).
https://doi.org/10.1021/acsaem.1c01505
2021-08
(online)
6.024 0
159. J. Endo, S. Inaba, O. Homma and Y. Suzuki, "Structural features of (Li,Na,K)PO3 mixed alkali metaphosphate glass for significant anisotropy," J. Am. Ceram. Soc., 105 [1] 217-224, 758-759 (2022).
https://doi.org/10.1111/jace.18063
https://doi.org/10.1111/jace.18137 (Erratum)
2021-07
(online)

2022-01
(print)
3.784 1
158. Z. Ma and Y. Suzuki, "Hierarchical structure control of MgAl2O4 porous ceramics and application to organic polymer filtration membrane," J. Am. Ceram. Soc., 104 [12] 6144-6154 (2021).
http://doi.org/10.1111/jace.18009
2021-07
(online)

2021-12
(print)
3.784 0
157. H. Ishitsuka, Y. Nakamura, H. Abe and Y. Suzuki, "Synthesis, microstructure and electrochemical characterization of NiMn2O4 nanoparticles via a simple citric acid method," J. Ceram. Soc. Jpn., 129 [6] 332-336 (2021).
https://doi.org/10.2109/jcersj2.21009
2021-06
(online)
1.224 0
156. R. Hatori and Y. Suzuki, "Effect of sintering temperature on water-purification performance of Al2O3/3Y-ZrO2 membrane filters," J. Mater. Sci., 56 [16] 9668-9677 (2021).
https://doi.org/10.1007/s10853-021-05927-w
2021-03
(online)
4.220 0
155. Y. Okamoto, M. Sumiya, Y. Nakamura and Y. Suzuki, "Effective silicon production from SiCl4 source using hydrogen radicals generated and transported at atmospheric pressure," Sci. Tech. Adv. Mater., 21 [1] 482-491 (2020).
https://doi.org/10.1080/14686996.2020.1789438
2020-06
(online)
8.090 0
154. S. Kimura, Y. Kaneko, K. Marumoto, Y. Suzuki, "Synthesis and color development mechanism of Li2CoTi3O8 cyan pigments: effect of synthetic temperature," J. Ceram. Soc. Jpn., 128 [5] 260-266 (2020).
http://doi.org/10.2109/jcersj2.20037
2020-05
(online)
1.224 0
153. H.-W. Son, Q. Guo, Y. Suzuki, B.-N. Kim, and T. Mori, "Thermoelectric properties of MgTi2O5/TiN conductive composites prepared via reactive spark plasma sintering for high temperature functional applications," Scripta Mater.,178, 44-50 (2020).
https://doi.org/10.1016/j.scriptamat.2019.11.008
2019-11
(online)
2020-03
(print)
5.611 4
152. K. Fukui, Y. Nakamura, H. Abe and Y. Suzuki, "Hydrothermal synthesis and electrochemical capacitor application of urchin-like NiCo2O4 particles: effect of urea concentrations," J. Ceram. Soc. Jpn., 127 [11] 843-848 (2019).
https://doi.org/10.2109/jcersj2.19069
2019-11
(online)
1.224 3
151. C. K. Tsai, N. T. Lee, G. H. Huang, Y.Suzuki and R. A. Doong, "Simultaneous recovery of display panel waste glass and wastewater boron by chemical oxo-precipitation with fluidized-bed heterogeneous crystallization," ACS Omega, 4 [9] 14057-14066 (2019).
https://doi.org/10.1021/acsomega.9b01900
2019-08
(online)
3.512 4
150. H. Abe, T. Naka, K. Sato, Y. Suzuki and M. Nakano, "Shape-Controlled Syntheses of Magnetite Microparticles and Their Magnetorheology," Int. J. Mol. Sci., 20 [15] no. 3617 (2019).
https://doi.org/10.3390/ijms20153617
2019-07
(online)
5.923 5
149. Y. Kamato, Y. Suzuki, "Reactive synthesis of porous MgAl2O4 membranes on a macroporous Al2O3-based ceramic tube toward cross-flow ultrafiltration," J. Ceram. Soc. Jpn., 127 [4] 267-271 (2019).
http://doi.org/10.2109/jcersj2.18202
2019-04
(online)
1.224 2
148. S. Kimura and Y. Suzuki, "Synthesis of Co-lean and Co-rich Li2CoTi3O8-based pigments: potential Co reduction and blue-green dichroism," Ceram. Int., 45 [9] 12602-12607 (2019).
https://doi.org/10.1016/j.ceramint.2019.03.036
2019-03
(online)

2019-06
(print)
4.527 5
147. Y. Okamoto, M. Sumiya and Y. Suzuki, "Perovskite solar cells with >19% efficiency achieved by advanced three-step method using additional HC(NH2)2I-NaI spin-coating," ACS Appl. Energy Mater., 2 [3] 1823-1831 (2019).
https://doi.org/10.1021/acsaem.8b01978
2019-02
(online)

2019-03
(print)
6.024 2
146. K. Fukui and Y. Suzuki, "Well-facetted spinel-type Co3O4 microcrystal assembly prepared by hydrothermal synthesis and post-thermal decomposition," Ceram. Int., 45 [7A] 9288-9292 (2019).
https://doi.org/10.1016/j.ceramint.2019.01.157
2019-01
(online)

2019-05
(print)
4.527 4
145. M. Machida, M. Kobayashi, Y. Suzuki, H. Abe, "Facile synthesis of >99% phase-pure brookite TiO2 by hydrothermal conversion from Mg2TiO4," Ceram. Int., 44 [14] 17562-17565 (2018).
https://doi.org/10.1016/j.ceramint.2018.06.170
2018-06
(online)

2018-10
(print)
4.527 3
144. H.-W. Son, B.-N. Kim, T. S. Suzuki and Y. Suzuki, "Fabrication of translucent AlN ceramics with MgF2 additive by spark plasma sintering," J. Am .Ceram. Soc., 101 [10] 4430-4433 (2018).
https://doi.org/10.1111/jace.15726
2018-04
(online)

2018-10
(print)
3.784 6
143. T. Kozawa, Y. Suzuki and M. Naito, "Scalable synthesis of Sr3Al2(OH)12 hydrogarnet by wet milling and its thermal decomposition behavior," Mater. Chem. Phys., 212, 245-251 (2018).
https://doi.org/10.1016/j.matchemphys.2018.03.060
2018-03
(online)
2018-06
(print)
4.094 6
142. X. Miao and Y. Suzuki, "Impurity effects on phase and microstructure stabilities of reactively-sintered porous MgTi2O5," Ceram. Int., 44 [8] 10000-10005 (2018).
https://doi.org/10.1016/j.ceramint.2018.02.174
2018-03
(online)

2018-06
(print)
4.527 1
141. Y. Okamoto, T. Yasuda, M. Sumiya and Y. Suzuki, "Perovskite solar cells prepared by advanced 3-step method using additional HC(NH2)2I spin-coating: efficiency improvement with multiple bandgap structure," ACS Appl. Energy Mater., 1 [3] 1389-1394 (2018).
https://doi.org/10.1021/acsaem.8b00178
2018-02
(online)

2018-03
(print)
6.024 4
140. M. Kobayashi, Y. Suzuki, T. Goto, S. H. Cho, T. Sekino, Y. Asakura, and S. Yin, "Low-temperature hydrothermal synthesis and characterization of SrTiO3 photocatalysts for NOx degradation," J. Ceram. Soc. Jpn., 126 [2] 135-138 (2018).
http://doi.org/10.2109/jcersj2.17195
2018-02
(online)
1.224 11
139. M. Machida, M. Kobayashi and Y. Suzuki, "Photo-induced hydrophilicity of brookite TiO2 prepared by hydrothermal conversion method from Mg2TiO4," J. Ceram. Soc. Jpn., 126 [1] 61-65 (2018).
http://doi.org/10.2109/jcersj2.17174
2018-01
(online)
1.224 2
138. K. Kawaguchi, Y. Suzuki, T. Goto, S. H. Cho, T. Sekino, "Homogeneously bulk porous calcium hexaaluminate (CaAl12O19): Reactive sintering and microstructure development," Ceram. Int., 44 [4] 4462-4466 (2018).
https://doi.org/10.1016/j.ceramint.2017.11.138
2017-11
(online)

2018-03
(print)
4.527 10
137. K. Fukui and Y. Suzuki, "Reactive sintering and particle morphology control of beta"-alumina based water-purification filters," J. Mater. Sci., 53 [2] 1005-1013 (2018).
https://doi.org/10.1007/s10853-017-1599-z
2017-09
(online)

2018-01
(print)
4.220 5
136. Y. Kamato and Y. Suzuki, "Reactively sintered porous MgAl2O4 for water-purification filter with controlled particle morphology," Ceram. Int., 43, 14090-14095 (2017).
https://doi.org/10.1016/j.ceramint.2017.07.145
2017-07
(online)

2017-11
(print)
4.527 8
135. Y. Okamoto and Y. Suzuki, "Perovskite solar cells prepared by a new 3-step method including a PbI2 scavenging step," Mater. Sci. Semicond. Process., 71, 1-6 (2017).
http://dx.doi.org/10.1016/j.mssp.2017.06.049
2017-07
(online)
2017-11
(print)
3.927 3
134. K. Takahashi and Y. Suzuki, "Perovskite solar cells with CuI inorganic hole conductor," Jpn. J. Appl. Phys., 56, 08MC04 (2017).
https://doi.org/10.7567/JJAP.56.08MC04
2017-07
(online)

2017-08
(print)
1.480 8
133.
P
Y. Suzuki, H. Abe, H. Yamamoto, K. Ito, H. Inoue, M. Nakamura, "Spherical porous granules in MgO-Fe2O3-Nb2O5 system: In situ observation of formation behavior using high-temperature confocal laser-scanning microscopy," J. Eur. Ceram. Soc., 37 [16] 5339-5345 (2017).
Shaping of Advanced Ceramics, July 18-20, 2016, Montpellier, France.
http://dx.doi.org/10.1016/j.jeurceramsoc.2017.05.056
2017-06
(online)

2017-12
(print)
5.302 0
132. K. Kawashima, Y. Okamoto, O. Annayev, N. Toyokura, R. Takahashi, M. Lippmaa, K. Itaka, N. Matsuki, Y. Suzuki and H. Koinuma, "Combinatorial screening of halide perovskite thin films and solar cells by mask-defined IR laser molecular beam epitaxy, " Sci. Tech. Adv. Mater., 18 [1] 307-315.
http://dx.doi.org/10.1080/14686996.2017.1314172
2017-04
(online)
8.090 17
131. Y. Michiue, H. Nishijima, Y. Suzuki and T. Mori, "Synthesis and thermoelectric properties of composite oxides in the pseudobinary system ZnO-Ga2O3," Solid State Sci., 65, 29-32 (2017).
http://dx.doi.org/10.1016/j.solidstatesciences.2016.12.020
2017-01
(online)

2017-03
(print)
3;059 15
130. Y. Nakagoshi and Y. Suzuki, "Dimensional change behavior of porous MgTi2O5 in reactive sintering," Ceram. Int., 43 [7] 5541-5546 (2017).
http://dx.doi.org/10.1016/j.ceramint.2017.01.079
2017-01
(online)

2017-05
(print)
4.527 4
129. T. Okano and Y. Suzuki, "Gas-assisted coating of Bi-based (CH3NH3)3Bi2I9 active layer in perovskite solar cells," Mater. Lett., 191, 77-79 (2017).
http://dx.doi.org/10.1016/j.matlet.2017.01.047
2017-01
(online)

2017-03
(print)
3.423 22
128. H. Nishijima, T. Kawashima, R. S. S. Maki and Y. Suzuki, "Microstructure and piezoelectric properties of (Bi0.5Na0.5)1-xBaxTi1-x(Fe0.5Nb0.5)xO3 ceramics," Arab. J. Chem., 12 [8] 5253-5259 (2019).
http://dx.doi.org/10.1016/j.arabjc.2016.12.017
2017-01
(online)

2019-12
(online)
5.165 3
127. R. S. S. Maki, P. E. D. Morgan and Y. Suzuki, "Synthesis and Characterization of a Simpler Mn-free, Fe-rich M3-type Murataite," J Alloys Compd., 698, 99-102 (2017).
http://dx.doi.org/10.1016/j.jallcom.2016.12.142
2016-12
(online)
2017-03
(print)
5.316 5
126. Y. Okamoto, R. Fukui, M. Fukazawa and Y. Suzuki, "SrTiO3/TiO2 composite electron transport layer for perovskite solar cells," Mater. Lett., 187, 111-113 (2017).
http://dx.doi.org/10.1016/j.matlet.2016.10.090
2016-10
(online)
3.423 19
125. T. Kawashima and Y. Suzuki, "Reactive Sintering and Piezoelectric Properties of 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 Ceramics with ZnO Additive," J. Ceram. Soc. Jpn., 124 [9] 911-914 (2016).
http://dx.doi.org/10.2109/jcersj2.16051
2016-09
(online)
1.224 3
124. R. S. S. Maki, K. Kobayashi and Y. Suzuki, "Electrical properties of murataite modules with complex and large-volume fluorite-type superstructures," Mater. Res. Bull., 84, 254-258 (2016).
http://dx.doi.org/10.1016/j.materresbull.2016.08.016
2016-08
(online)
4.641 4
123. H.-W. Son, R. S. S. Maki, B.-N. Kim, and Y. Suzuki, "High-Strength Pseudobrookite-Type MgTi2O5 by Spark Plasma Sintering," J. Ceram. Soc. Jpn., 124 [8] 838-840 (2016).
http://dx.doi.org/10.2109/jcersj2.16058
2016-08
(online)
1.224 5
122. Y. Okamoto and Y. Suzuki, "Mesoporous BaTiO3/TiO2 Double Layer for Electron Transport in Perovskite Solar Cells," J. Phys. Chem. C., 120 [26] 13995-14000 (2016).
http://dx.doi.org/10.1021/acs.jpcc.6b04642
2016-06
(online)
4.126 37
121. T. S. Suzuki, Y. Suzuki, T. Uchikoshi, and Y. Sakka, "Triaxial crystalline orientation of MgTi2O5 achieved using a strong magnetic field and geometric effect," J. Am. Ceram. Soc., 99 [6] 1852-1854 (2016).
http://dx.doi.org/10.1111/jace.14194
2016-06 3.784 4
120. Y. Nakagoshi, J. Sato, M. Morimoto and Y. Suzuki, "Near-zero volume-shrinkage in reactive sintering of porous MgTi2O5 with pseudobrookite-type structure," Ceram. Int., 42 [7] 9139-9144 (2016).
http://dx.doi.org/10.1016/j.ceramint.2016.03.003
2016-05 4.527 8
119. R. S. S. Maki, Peter E. D. Morgan and Y. Suzuki, "X-ray powder diffraction characterization of the large volume unit-cell of the M8 murataite polytype," Powder Diffraction, 31 [1] 8-15 (2016).
http://dx.doi.org/10.1017/S0885715615000913
2016-03 1.570 6
118. T. Matsubara, Y. Suzuki and S. Tohno, "Synthesis and characterization of TiO2 powders by double-nozzle electrospray pyrolysis method. Part 2. Materials evaluation," Comptes Rendus Chimie, 19 [3] 342-346 (2016).
http://dx.doi.org/10.1016/j.crci.2015.11.009
2016-03 3.117 1
117. T. Okano and Y. Suzuki, "Hydrothermal synthesis of carbonaceous spheres starting from different starches," J. Ceram. Soc. Jpn.,124 [1] 79-81 (2016).
http://doi.org/10.2109/jcersj2.15111

2016-01 1.224 4
116. R. S. S. Maki and Y. Suzuki, "Mechanical Strength and Electrical Conductivity of Reactively-Sintered Pseudobrookite-type Al2TiO5-MgTi2O5 Solid Solutions," J. Ceram. Soc. Jpn., 124 [1] 1-6 (2016).
http://doi.org/10.2109/jcersj2.15098
2016-01 1.224 4
115. Y. Suzuki, H. Tokoro and H. Abe, "Self-organized formation of spherical porous granules only by one-step heat-treatment in MgO-Fe2O3-Nb2O5 system," Mater. Lett., 163, 43-46 (2016).
http://doi.org/10.1016/j.matlet.2015.10.007
2016-01 3.423 2
114. Y. Okamoto and Y. Suzuki, "Double-layer dye-sensitized solar cells using SrTiO3 and BaTiO3 second layer with enhanced photovoltaic performance," J. Ceram. Soc. Jpn., 123 [10] 967-971 (2015).
http://doi.org/10.2109/jcersj2.123.967
2015-10 1.224 11
113. Y. Nakagoshi and, Y. Suzuki, "Pseudobrookite-type MgTi2O5 water-purification filter with controlled particle morphology," J. Asian Ceram. Soc., 3 [3] 334-338 (2015).
http://doi.org/10.1016/j.jascer.2015.06.005
2015-09 3.125 13
112. M. Nukunudompanich, S. Chuangchote, Y. Okamoto, Y. Shinoda and Y. Suzuki, "TiO2 Nanorods and Semi-nanotubes Prepared from Anodic Aluminum Oxide Template and Their Applications as Photoelectrodes in Dye-Sensitized Solar Cells," J. Ceram. Soc. Jpn., 123 [5] 428-432 (2015).
http://doi.org/10.2109/jcersj2.123.428
2015-05 1.224 0
111. Y. Shinoda, Y. Suzuki and K. Yoshida, "Electric Field Effect on Texture Formation of Mullite in Spark Plasma Sintered SiC with Al2O3-SiO2 Additive," Scripta Mater., 100, 51-54 (2015).
http://doi.org/10.1016/j.scriptamat.2014.12.011
2015-04 5,611 5
110. T. Kawashima and Y. Suzuki, "High-temperature X-ray diffraction analysis and reactive sintering of BaTiO3 piezoelectric ceramics," J. Ceram. Soc. Jpn., 123 [2] 83-85 (2015).
http://doi.org/10.2109/jcersj2.123.83
2015-02 1.224 2
109. Y. Okamoto and Y. Suzuki, "Perovskite-type SrTiO3, CaTiO3 and BaTiO3 porous film electrodes for dye-sensitized solar cells," J. Ceram. Soc. Jpn., 122 [8] 728-731 (2014).
http://dx.doi.org/10.2109/jcersj2.122.728
2014-08 1.224 29
108. H. Nishijima and Y. Suzuki, "Microstructural control of porous Al2TiO5 by using various starches as pore-forming agents," J. Ceram. Soc. Jpn., 122 [7] 565-569 (2014).
http://doi.org/10.2109/jcersj2.122.565
2014-07 1.224 9
107. H. Itoh, Y. Suzuki, T. Sekino, J.-C. Valmalette, and S. Tohno, "Electrospray deposition and characterization of Cu2O thin films with ring-shaped 2-D network structure," J. Ceram. Soc. Jpn., 122 [5] 361-366 (2014).
http://doi.org/10.2109/jcersj2.122.361
2014-05 1.224 4
106. K. Aisu, M. Osada and Y. Suzuki, "Synthesis of BaTiO3 Nanowires via Anodic Aluminum Oxide Template Method Assisted by Vacuum-and-Drop Loading," J. Mater. Sci. Nanotech., 1 [S1] no. S101 (2014).
http://doi.org/10.15744/2348-9812.1.S101
2014-04 N/A N/A
105. M. ElNouby, K. Kuruma, E. Nakamura, H. Abe, Y. Suzuki and M. Naito, "Synthesis of WO3・0.33H2O nanoneedles by hydrothermal treatment of ion-exchanged precursor," J. Flux Growth, 8 [2] 62-65 (2013).
Contents only
2013-12 N/A N/A
104. K. Aisu, T. S. Suzuki, E. Nakamura, H. Abe and Y. Suzuki, "AAO-Template Assisted Synthesis and Size Control of One-Dimensional TiO2 nanomaterials," J. Ceram. Soc. Jpn., 121 [10] 915-918 (2013).
http://doi.org/10.2109/jcersj2.121.915
2013-10 1.224 8
103. M. ElNouby, K. Kuruma, E. Nakamura, H. Abe, Y Suzuki and M. Naito, "Facile synthesis of WO3-H2O square nanoplates via a mild aging of ion-exchanged precursor," J. Ceram. Soc. Jpn., 121 [10] 907-911 (2013).
http://doi.org/10.2109/jcersj2.121.907
2013-10 1.224 9
102.
P
T. Kozawa, H. Hattori, S. Ogo, Y. Ide and Y. Suzuki, "Hydrothermal conversion of Mg2TiO4 into brookite-type TiO2 under mild conditions," J. Mater. Sci., 48 [22] 7969-7973 (2013).
Fiber Society's Fall Meeting and Technical Conference, Boston, Nov. 7-9, 2012.
http://doi.org/10.1007/s10853-013-7607-z
2013-11 4.220 4
101. Y. Shinoda, Y. Suzuki and K. Yoshida, "TEM analysis of nanocrystalline SiC ceramics sintered by SPS using Al2O3-TiO2 additive," J. Asian Ceram. Soc., 1 [3] 267-273 (2013).
http://doi.org/10.1016/j.jascer.2013.06.004
2013-09 3.125 10
100. H. Nishijima, R. Maki and Y. Suzuki, "Microstructural Control of Porous Al2TiO5 by Using Potato Starch as Pore-Forming Agent," J. Ceram. Soc. Jpn., 121 [8] 730-733 (2013).
http://doi.org/10.2109/jcersj2.121.730
2013-08 1.224 7
99. R. Maki and Y. Suzuki, "Microstructure and mechanical properties of MgO-doped Al2TiO5 prepared by reactive sintering," J. Ceram. Soc. Jpn., 121 [7] 568-571 (2013).
http://doi.org/10.2109/jcersj2.121.568
2013-07 1.224 12
98. T. Hono, N. Inoue, M. Morimoto, Y. Suzuki, "Reactive Sintering and Microstructure of Uniform, Openly-Porous Al2TiO5," J. Asian Ceram. Soc., 1 [2] 178-183 (2013).
http://doi.org/10.1016/j.jascer.2013.05.004
2013-06 3.125 18
97. T. Kozawa, K. Yanagisawa and Y. Suzuki, "Water vapor-assisted solid-state reaction for the synthesis of nanocrystalline BaZrO3 powder," J. Ceram. Soc. Jpn., 121 [3] 308-312 (2013).
http://doi.org/10.2109/jcersj2.121.308
2013-03 1.224 8
96. T. Matsubara, Y. Suzuki and S. Tohno, "Synthesis and characterization of TiO2 powders by double-nozzle electrospray pyrolysis method. Part 1. refinement and monodispersion of sprayed droplets," Comptes Rendus Chimie, 16 [3] 244-251 (2013).
http://doi.org/10.1016/j.crci.2012.11.003
2013-03 3.117 6
95. T. Kozawa, K. Yanagisawa, A. Yoshida, A. Onda, and Y. Suzuki, "Preparation of beta-CaSiO3 powder by water vapor-assisted solid-state reaction," J. Ceram. Soc. Jpn. 121 [1] 103-105 (2013)
http://doi.org/10.2109/jcersj2.121.103
2013-01 1.224 7
94. Y. Suzuki, T. S. Suzuki, Y. Shinoda, and K. Yoshida, Uniformly Porous MgTi2O5 with Narrow Pore-Size Distribution: XAFS Study, Improved In-Situ Synthesis, and New In-Situ Surface Coating, Adv. Eng. Mater, 14 [12] 1134-1138 (2012).
http://doi.org/10.1002/adem.201200049
2012-12 3.862 18
93. Y. Terada, Y. Suzuki and S. Tohno, "Synthesis and characterization of TiO2 powders by electrospray pyrolysis method," Mater. Res. Bull., 47 [3] 889-895 (2012).
http://doi.org/10.1016/j.materresbull.2011.11.032
2012-03 4.641 13
92. D. D’Elia, C. Beauger, J.-F. Hochepied, A. Rigacci, M.-H. Berger, N. Keller, V. Keller-Spitzer, Y. Suzuki, J.-C. Valmalette, M. Benabdesselam, and P. Achard, "Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels," Int. J. Hydro. Energy, 36 [22] 14360-14373 (2011).
http://doi.org/10.1016/j.ijhydene.2011.08.007
2011-11 5.816 56

91. Y. Suzuki and Y. Shinoda, "Magnesium Dititanate (MgTi2O5) with Pseudobrookite Structure: A Review," Sci. Tech. Adv. Mater., 12 [3] no.034301 (2011).
http://doi.org/10.1088/1468-6996/12/3/034301
2011-05 8.090 34
90. H Tsukigase, Y. Suzuki*, Marie-Hélène Berger, T. Sagawa, and S. Yoshikawa, "Wet Chemical Synthesis and Self-Assembly of SnS2 Nanoparticles on TiO2 for Quantum Dot-Sensitized Solar Cells," J. Nanosci. Nanotech., 11 [4] 3215-3221 (2011).
http://doi.org/10.1166/jnn.2011.3598
2011-04 1.134 13
89. H Tsukigase, Y. Suzuki*, Marie-Hélène Berger, T. Sagawa, and S. Yoshikawa, "Synthesis of SnS Nanoparticles by SILAR Method for Quantum Dot-Sensitized Solar Cells," J. Nanosci. Nanotech., 11 [3] 1914-1922 (2011).
http://doi.org/10.1166/jnn.2011.3582
2011-03 1.134 37
88. Y. Suzuki* and M. Morimoto, "Uniformly Porous MgTi2O5 with Narrow Pore-Size Distribution: In Situ Processing, Microstructure and Thermal Expansion Behavior," J. Ceram. Soc. Jpn., 118 [12] 1212-1216 (2010).
http://doi.org/10.2109/jcersj2.118.1212
2010-12 1.224 22
87. Y. Suzuki* and M. Morimoto, "Porous MgTi2O5/MgTiO3 Composites with Narrow Pore-Size Distribution: In Situ Processing and Pore Structure Analysis," J. Ceram. Soc. Jpn., 118 [9] 819-822 (2010).
http://doi.org/10.2109/jcersj2.118.819
2010-09 1.224 19
86. Y. Hayami, Y. Suzuki*, T. Sagawa and S. Yoshikawa, "TiO2 Rutile Nanorod Arrays Grown on FTO Substrate Using Amino Acid at a Low Temperature,"J. Nanosci. Nanotech., 10 [4] 2284–2291 (2010).
http://doi.org/10.1166/jnn.2010.1900
2010-04 1.134 10
85. B. P. Pichon, Y. Suzuki* and M.-H. Berger, "Seeded Growth of Iron Oxide onto Titanate Nanowires, "J. Jpn. Soc. Powd. Powd. Metall., 56 [10] 640-644 (2009).
http://doi.org/10.2497/jjspm.56.640
2009-10 N/A N/A
84. Y. Suzuki, B. P. Pichon, M. Grandcolas, N. Keller, V. Keller-Spitzer and S. Yoshikawa, "Preparation and Microstructure of Titanate Nanotube Thin Films by Spray Layer-by-Layer Assembly Method: 1. Agglomerate Problem of Titanate Nanotubes for Thin-Film Processing," Trans. MRS-J, 34 [3] 545-549 (2009).
http://doi.org/10.14723/tmrsj.34.545
2009-09 N/A N/A
83. Y. Suzuki and P. E. D. Morgan, "Meso- and Macroporous Ceramics by Phase Separation and Reactive Sintering Methods," MRS Bull, 34 [8] 587-591 (2009).
http://doi.org/10.1557/mrs2009.158
2009-08 6.578 10
82. Y. Suzuki, B. P. Pichon, D. D'Elia, C. Beauger and S. Yoshikawa, "Preparation and Microstructure of Titanate Nanowire Thin Films by Spray Layer-by-Layer Assembly Method," J. Ceram. Soc. Jpn., 117 [3] 381-384 (2009).
http://doi.org/10.2109/jcersj2.117.381
2009-03 1.224 10
81. J. Jitputti, T. Ratanavoravipa, S. Chuangchote, S. Pavasupree, Y. Suzuki, and S. Yoshikawa, "Low Temperature Hydrothermal Synthesis of Monodispersed Flower-like Titanate Nanosheets," Catal. Comm., 10 [4] 378-382 (2009).
http://doi.org/10.1016/j.catcom.2008.09.026
2009-01 3.626 59
80. Y. Suzuki, J. Gonzalez-Aguilar, N. Traisnel, M.-H. Berger, M. Repoux and L. Fulcheri, "Non-Equilibrium Nitrogen DC-Arc Plasma Treatment of TiO2 nanopowder," J. Nanosci. Nanotech., 9 [1] 256–260 (2009).
http://doi.org/10.1166/jnn.2009.J035
2009-01 1.134 4
79
P.
Y. Suzuki, M. H. Berger, D. D'elia, P. Ilbizian, C. Beauger, A. Rigacci, J. F. Hochepied, and P. Achard, "Synthesis and Microstructure of Novel TiO2 Aerogel/TiO2 Nanowire Composite," NANO, 3 [5] 373-379 (2008).
3rd International Symposium on Nanotechnology in Environmental Protection and Pollution (ISNEPP 2007), Ft Lauderdale, FL, DEC, 2007
http://doi.org/10.1142/S1793292008001222
2008-10 1.556 3
78. J. Jitputti, Y. Suzuki and S. Yoshikawa, "Synthesis of TiO2 Nanowires and Their Photocatalytic Activity for Hydrogen Evolution," Catal. Comm., 9 [6] 1265-1271 (2008).
http://doi.org/10.1016/j.catcom.2007.11.016
2008-03 3.626 158
77.
P.
J. Jitputti, S. Pavasupree, Y. Suzuki, and S. Yoshikawa, "Synthesis of TiO2 Nanotubes and Its Photocatalytic Activity for H2 Evolution," Jpn. J. Appl. Phys., 47 [1] 751-756 (2008).
I
nternational Symposium on Organic and Inorganic Electronic Materials and Related Nanotechnologies, Nagano, JAPAN, JUN 19-22, 2007
http://doi.org/10.1143/JJAP.47.751
2008-01 1.480 46
76. K. Asagoe, S. Ngamsinlapasathian, Y. Suzuki*, and S. Yoshikawa, "Addition of TiO2 Nanowires in Different Polymorphs for Dye-Sensitized Solar Cells," Open Chem., 5 [2] 605-619 (2007).
http://doi.org/10.2478/s11532-007-0001-4
2007-06
1.554 35
75. S. Pavasupree, S. Ngamsinlapasathian, Y. Suzuki and S. Yoshikawa, "Preparation and Characterization of High Surface Area Nanosheet Titania with Mesoporous Structure," Mater. Lett., 61 [14-15] 2973-2977 (2007).
http://doi.org/10.1016/j.matlet.2006.10.056
2007-06 3.423 28
74.
P.
Y. Suzuki, S. Pavasupree, S. Yoshikawa, and R. Kawahata, "Direct Synthesis of an Anatase-TiO2 Nanofiber/Nanoparticle Composite Powder from Natural Rutile," Physica Status Solidi (a), 204 [6] 1757-1761 (2007).
7th International Conference on Trends in Nanotechnology (TNT 2006), Grenoble, FRANCE, SEP 04-08, 2006
http://doi.org/10.1002/pssa.200675312
2007-06 1.981 10
73. J. Jitputti, S. Pavasupree, Y. Suzuki and S. Yoshikawa, "Synthesis and photocatalytic activity for water-splitting reaction of nanocrystalline mesoporous titania prepared by hydrothermal method," J. Solid State Chem., 180 [5] 1743-1749 (2007).
http://doi.org/10.1016/j.jssc.2007.03.018
2007-05 3.498 90
72. Y. Suzuki, S. Ngamsinlapasathian, K. Asagoe and S. Yoshikawa, "Nanowire/ Nanoparticle Composite Electrodes for Dye-Sensitized Solar Cells," J. Jpn. Soc. Powd. Powd. Metall., 54 [3] 202-208(2007).
http://doi.org/10.2497/jjspm.54.202
2007-03 N/A N/A
71. R. Yoshida, Y. Suzuki and S. Yoshikawa, "Effect of HCl Acid Treatment on the Microstructure of Titanate Nanotubes," J. Jpn. Soc. Powder Powder Metall., 53 [12] 943-946 (2006).
http://doi.org/10.2497/jjspm.53.943
2006-12 N/A N/A
70. S. Pavasupree, S. Ngamsinlapasathian, Y. Suzuki and S. Yoshikawa, "Synthesis and Dye-Sensitized Solar Cell Performance of Nanorods/Nanoparticles TiO2 from High Surface Area Nanosheet TiO2," J. Nanosci. Nanotech., 6 [12] 3685-3692 (2006).
http://doi.org/10.1166/jnn.2006.612
2006-12 1.134 36
69.
P
S. Ngamsinlapasathian, S. Pavasupree, Y. Suzuki and S. Yoshikawa, "Dye-Sensitized Solar Cell Made of Mesoporous Titania by Surfactant-Assisted Templating Method," Solar Energy Mater. Sol. Cells, 90 [18-19] 3187-3192 (2006).
14th International Photovoltaic Science and Engineering Conference, Bangkok, THAILAND, JAN 27-FEB 01, 2004
http://doi.org/10.1016/j.solmat.2006.06.021
2006-11 7.267 33
68. S. Pavasupree, S. Ngamsinlapasathian, M. Nakajima, Y. Suzuki and S. Yoshikawa, "Synthesis, Characterization, Photocatalytic Activity and Dye-sensitized Solar Cell Performance of Nanorods/Nanoparticles TiO2 with Mesoporous Structure," J. Photochem. Photobio. A: Chem, 184 [1-2] 163-169 (2006).
http://doi.org/10.1016/j.jphotochem.2006.04.010
2006-11 4.291 105
67. N. Koshitani, S. Sakulhaemaruethai, Y. Suzuki, and S. Yoshikawa, "Preparation of Mesoporous Titania Nanocyrstals Using Alkylamine Surfactant Templates," Ceram. Int., 32 [7] 819-824 (2006).
http://doi.org/10.1016/j.ceramint.2005.06.009
2006-09 4.527 22
66. Y. Suzuki, S. Ngamsinlapasathian, R. Yoshida and S. Yoshikawa, "Partially Nanowire-Structured TiO2 Electrode For Dye-Sensitized Solar Cells," Open Chem., 4 [3] 476-488 (2006).
http://doi.org/10.2478/s11532-006-0015-3
2006-09 1.554 45
65. S. Ngamsinlapasathian, T. Sreethawong, Y. Suzuki and S. Yoshikawa, "Doubled Layered ITO/SnO2 Conducting Glass for Substrate of Dye-Sensitized Solar Cells," Solar Energy Mater. Solar Cells, 90 [14] 2129-2140 (2006).
http://doi.org/10.1016/j.solmat.2005.12.005
2006-09 7.267 53
64. A. Kitiyanan, S. Sakulkhaemaruethai, Y. Suzuki, and S. Yoshikawa, "Structural and Photovoltaic Properties of Binary TiO2-ZrO2 Oxides System Prepared by Sol-Gel Method," Comp. Sci. Tech., 66 [10] 1259-1265 (2006).
http://doi.org/10.1016/j.compscitech.2005.10.035
2006-08 8.528 53
63. A. Kitiyanan, T. Kato, Y. Suzuki, and S. Yoshikawa, "The Use of Binary TiO2-GeO2 Oxide Electrodes to Enhanced Efficiency of Dye-Sensitized Solar Cells," J. Photochem. Photobio. A. Chem, 179 [1-2] 130-134 (2006).
http://doi.org/10.1016/j.jphotochem.2005.08.002
2006-04 4.291 23
62.
P
T. Sreethawong, Y. Suzuki and S. Yoshikawa, "Platinum-Loaded Mesoporous Titania by Single-Step Sol-Gel Process with Surfactant Template: Photocatalytic Activity for Hydrogen Evolution," Comptes Rendus Chimie, 9 [2] 307-314 (2006).
15th International Conference on Photochemical Conversion and Storage of Solar Energy, Paris, FRANCE, JUL 04-07, 2004
http://doi.org/10.1016/j.crci.2005.05.015
2006-02 3.117 20
61. Y. Suzuki, M. Tsukatsune, S. Yoshikawa, and P. E. D. Morgan, "Uniformly Porous Al2O3/LaPO4 and Al2O3/CePO4 Composites with Narrow Pore-Size Distribution," J. Am. Ceram. Soc., 88 [11] 3283-3286 (2005).
http://doi.org/10.1111/j.1551-2916.2005.00594.x
2005-11 3.784 6
60. S. Pavasupree, Y. Suzuki, S. Yoshikawa and R. Kawahata, "Synthesis of Titanate, TiO2 (B), and Anatase TiO2 Nanofibers from Natural Rutile Sand," J. Solid State Chem., 178 [10] 3110-3116 (2005).
http://doi.org/10.1016/j.jssc.2005.07.022
2005-10 3.498 130
59. S. Sakulkhaemaruethai, S. Pavasupree, Y. Suzuki, S. Yoshikawa, "Photocatalytic activity of titania nanocrystals prepared by surfactant-assisted templating method -Effect of calcination conditions," Mater. Lett., 59 [23] 2965-2968 (2005).
http://doi.org/10.1016/j.matlet.2005.03.074
2005-10 3.423 33
58. S. Pavasupree, Y. Suzuki, S. Pivsa-Art, and S. Yoshikawa, "Preparation and Characterization of Mesoporous MO2 (M=Ti, Ce, Zr, and Hf) Nanopowders by a Modified Sol-Gel Method," Ceram. Int. 31 [7] 959-963 (2005).
http://doi.org/10.1016/j.ceramint.2004.10.009
2005-09 4.527 24
57. T. Sreethawong. Y. Suzuki and S. Yoshikawa, "Photocatalytic Evolution of Hydrogen over Mesoporous TiO2 Suppoted NiO photocatalyst Prepared by Single-step Sol-Gel Process with Surfactant Tempate," Int. J. Hydrogen Energy, 30 [10] 1053-1062 (2005).
http://doi.org/10.1016/j.ijhydene.2004.09.007
2005-08 5.816 215
56. R. Yoshida, Y. Suzuki*, and S. Yoshikawa, "Syntheses of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments," J. Solid State Chem., 178 [7] 2179-2185 (2005).
http://doi.org/10.1016/j.jssc.2005.04.025
2005-07 3.498 232
55. T. Sreethawong. S. Ngamsinlapasathian, Y. Suzuki and S. Yoshikawa, "Nanocrystalline Mesoporous Ta2O5-Based Photocatalysts Prepared by Surfactant-Assisted Templating Sol-Gel Process for Photocatalytic H2 Evolution," J. Molecular Catal. A, 235 [1-2] 1-11 (2005) (Current journal, "Molecular Catal.").
http://doi.org/10.1016/j.molcata.2005.03.021
2005-07 5.062 89
54. S. Pavasupree, Y. Suzuki, A. Kitiyanan, S. Pivsa-Art, and S. Yoshikawa, "Synthesis and Characterization of Vanadium Oxides Nanorods," J. Solid State Chem., 178 [6] 2152-2158 (2005).
http://doi.org/10.1016/j.jssc.2005.03.034
2005-06 3.498 95
53. R. Yoshida. Y. Suzuki and S. Yoshikawa, "Effects of Synthetic Conditions and Heat Treatment on the Structure of Partially Ion-Exchanged Titanate Nanotubes," Mater. Chem. Phys., 91 [2-3] 409-416 (2005).
http://doi.org/10.1016/j.matchemphys.2004.12.010
2005-06 4.094 170
52.
P
S. Pavasupree, Y. Suzuki, S. Pivsa-Art and S. Yoshikawa, "Synthesis and Characterization of Nanoporous, Nanorods, Nanowires Metal Oxides," Sci. Tech. Adv. Mater., 6 [3-4] 224-229 (2005).
International Symposium on Nanotechnology in Environmental Protection and Pollution (ISNEPP 2005), Bangkok, THAILAND, JAN 12-14, 2005
http://doi.org/10.1016/j.stam.2005.02.001
2005-04 8.090 43
51. Y. Suzuki, S. Pavasupree, S. Yoshikawa, and R. Kawahata, "Natural Rutile-Derived Titanate Nanofibers Prepared by Direct Hydrothermal Processing," J. Mater. Res., 20 [4] 1063-1070 (2005).
http://doi.org/10.1557/JMR.2005.0135
2005-04 3.089 65
50. S. Ngamsinlapasathian, T. Sreethawong, Y. Suzuki, and S. Yoshikawa, "Single- and Double-Layered Mesoporous TiO2/P25 TiO2 Electrode for Dye-Sensitized Solar Cell," Solar Energy Mater. Solar Cells, 86 [2] 269-282 (2005).
http://doi.org/10.1016/j.solmat.2004.06.010
2005-03 7.267 68
49. T. Sreethawong. Y. Suzuki and S. Yoshikawa, "Photocatalytic Evolution of Hydrogen over Nanocrystalline Mesoporous Titania Prepared by Surfactant-Assisted Templating Sol-Gel Process," Catal. Comm., 6 [2] 119-124 (2005).
http://doi.org/10.1016/j.catcom.2004.11.011
2005-02 3.626 62
48. T. Sreethawong. Y. Suzuki and S. Yoshikawa, "Synthesis, Characterization, and Photocatalytic Activity for Hydrogen Evolution of Nanocrystalline Mesoporous Titania Prepared by Surfactant-Assisted Templating Sol-Gel Process," J. Solid State Chem., 178 [1] 329-338 (2005).
http://doi.org/10.1016/j.jssc.2004.11.014
2005-01 3.498 179
47. S. Pavasupree, Y. Suzuki, S. Pivsa-Art, and S. Yoshikawa, "Preparation and Characterization of Mesoporous TiO2-CeO2 Nanopowders Respond to Visible Wavelength," J. Solid State Chem., 178 [1] 128-134 (2005).
http://doi.org/10.1016/j.jssc.2004.10.028
2005-01 3.498 93
46. S. Sakulkhaemaruethai, Y. Suzuki, and S. Yoshikawa, "Effect of ZrO2-Addition on Structure of Sol-Gel Derived TiO2 Nanopowder," J. Jpn. Soc. Powd. Powd. Metall., 51 [11] 789-794 (2004).
http://doi.org/10.2497/jjspm.51.789
2004-11 N/A N/A
45. S. Sakulkhaemaruethai, Y. Suzuki, and S. Yoshikawa, "Surfactant-Assisted Preparation and Characterization of Mesoporous Titania Nanocrystals - Effect of Various Processing Conditions," J. Ceram. Soc. Jpn., 112 [10] 547-552 (2004).
http://doi.org/10.2109/jcersj.112.547
2004-10 1.224 11
44.
P
S. Ngamsinlapasathian, S. Sakulkhaemaruethai S. Pavasupree, A. Kitiyanan, T. Sreethawong, Y. Suzuki, and S. Yoshikawa, "Highly efficient dye-sensitized solar cell using nanocrystalline titania containing nanotube structure," J. Photochem. Photobio. A. Chem., 164 [1-3] 145-151(2004).
International Conference on Photochemistry, Nara, JAPAN, JUL 25, 2003
http://doi.org/10.1016/j.jphotochem.2003.11.016
2004-08 4.291 101
43. Y. Suzuki, and S. Yoshikawa, "Synthesis and Thermal Analyses of TiO2-Derived Nanotubes Prepared by the Hydrothermal Method," J. Mater. Res., 19 [4] 982-985 (2004).
http://doi.org/10.1557/JMR.2004.0128
2004-04 3.089 228

42. N. Kondo, Y. Inagaki, Y. Suzuki, and T. Ohji, "Fabrication and mechanical properties of porous anisotropic silicon nitride with lutetia additive," J. Ceram. Soc. Jpn., 112 [6] 316-320 (2004).
http://doi.org/10.2109/jcersj.112.316
2004-06 1.224 16
41. Y. Suzuki, and T. Ohji, "Anisotropic thermal expansion of calcium dialuminate (CaAl4O7) simulated by molecular dynamics," Ceram. Int., 30 [1] 57-61 (2004).
http://doi.org/10.1016/S0272-8842(03)00062-2
2004-01(?) 4.527 14
40. Y. Suzuki, N. Kondo, T. Ohji and P. E. D. Morgan, "Uniformly Porous Composites with 3-D Network Structure (UPC-3D) for High-Temperature Filter Applications," Int. J. Appl. Ceram. Tech., 1 [1] 76-85 (2004).
http://doi.org/10.1111/j.1744-7402.2004.tb00157.x
2004-01 1.968 17
39. N. Kondo, M. Asayama, Y. Suzuki, and T. Ohji, "High-Temperature Strength of Sinter-Forged Silicon Nitride with Lutetia Additive," J. Am. Ceram. Soc., 86 [8] 1430-1432 (2003).
http://doi.org/10.1111/j.1151-2916.2003.tb03489.x
2003-08 3.784 19
38. Y. Suzuki, N. Kondo and T. Ohji, "Reactive Synthesis of a Porous Calcium Zirconate/Spinel Composite with Idiomorphic Spinel Grains," J. Am. Ceram. Soc., 86 [7] 1128-1131 (2003).
http://doi.org/10.1111/j.1151-2916.2003.tb03435.x
2003-07 3.784 26
37. N. Kondo, Y. Suzuki, T. Miyajima and T. Ohji, "High-Temperature Mechanical Properties of Sinter-Forged Silicon Nitride with Ytterbia Additive," J. Eur. Ceram. Soc., 23 [5] 809-815 (2003).
http://doi.org/10.1016/S0955-2219(02)00189-9
2003-03 5.302 30
36. N. Kondo, Y. Inagaki, Y. Suzuki, and T. Ohji, "Fabrication of Porous Anisotropic Silicon Nitride by Using Partial Sinter-Forging Technique," Mater. Sci. Eng. A, 335 [1-2] 26-31 (2002).
http://doi.org/10.1016/S0921-5093(01)01907-4
2002-09 5.234 24
35. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Effect of In-Doping on Microstructure and CH4-Sensing Ability of Porous CaZrO3/MgO Composites,"J. Eur. Ceram. Soc., 22 [7] 1177-1182 (2002).
http://doi.org/10.1016/S0955-2219(01)00405-8
2002-07 5.302 12
34. Y. Suzuki, H. J. Hwang, N. Kondo and T. Ohji, "In Situ Processing of a Porous Calcium Zirconate/Magnesia Composite with Platinum Nanodispersion and Its Influence on Nitric Oxide Decomposition," J. Am. Ceram. Soc., 84 [11] 2713-2715 (2001).
http://doi.org/10.1111/j.1151-2916.2001.tb01079.x
2001-11 3.784 11
33. N. Kondo, Y. Inagaki, Y. Suzuki, and T. Ohji, "High-Temperature Fracture Energy of Superplastically Forged Silicon Nitride," J. Am. Ceram. Soc., 84 [8] 1791-1796 (2001).
http://doi.org/10.1111/j.1151-2916.2001.tb00916.x
2001-08 3.784 17
32. N. Kondo, Y. Suzuki, M. E. Brito and T. Ohji, "Improved Creep Resistance in Anisotropic Silicon Nitride," J. Mater. Res., 16 [8] 2182-2185 (2001). 
http://doi.org/10.1557/JMR.2001.0297
2001-08 3.089 8
31.
P
Y. Suzuki, P. E. D. Morgan and T. Ohji, "Synthesis and Deformation Behavior of Nano-Diphasic Materials from Natural Dolomite," Mater. Sci. Eng. A, 304-306, 780-784 (2001).
10th International Conference on Rapidly Quenched and Metastable Materials (RQ10), BANGALORE, INDIA, AUG 23-27, 1999
http://doi.org/10.1016/S0921-5093(00)01566-5
2001-05 5.234 13
30. Y. Suzuki, N. Kondo and T. Ohji, "Effects of SiC Addition on MIcrostructure of Porous CaZrO3/MgO Composites," J. Jpn. Soc. Powd. Powd. Metall., 48 [4] 335-340 (2001).
http://doi.org/10.2497/jjspm.48.335
2001-04 N/A N/A
29. Y. Suzuki, N. Kondo and T. Ohji, "In Situ Synthesis and Microstructure of Porous CaAl4O7/CaZrO3 Composite," J. Ceram. Soc. Jpn., 109 [3] 205-209 (2001).
http://doi.org/10.2109/jcersj.109.1267_205
2001-03 1.224 15
28. N. Kondo, Y. Suzuki, J. F. Yang, G. J. Zhang and T. Ohji, "Porous Silicon Nitride-Based Ceramics Fabricated from Silicon and Carbon Powders," J. Mater. Sci. Lett., 20 [5] 461-463 (2001). (Currently, "J. Mater. Sci.")
http://doi.org/10.1023/A:1010971018713
2001-02 4.220 5
27. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "CH4-Sensing and High-Temperature Mechanical Properties of Porous CaZrO3/MgO Composites with Three-Dimensional Network Structure," J. Ceram. Soc. Jpn., 109 [1] 79-81 (2001).
http://doi.org/10.2109/jcersj.109.79
2001-01 1.224 17
26. N. Kondo, Y. Suzuki, and T. Ohji, "High-Strength Porous Silicon Nitride Fabricated by the Sinter-Forging Technique," J. Mater. Res., 16 [1] 32-34 (2001).
http://doi.org/10.1557/JMR.2001.0009
2001-01 3.089 32
25. Y. Suzuki, P. E. D. Morgan and T. Ohji, "New Uniformly Porous CaZrO3/MgO Composites with Three-Dimensional Network Structure from Natural Dolomite," J. Am. Ceram. Soc., 83 [8] 2091-2093 (2000).
http://doi.org/10.1111/j.1151-2916.2000.tb01519.x
2000-08 3.784 62
24. N. Kondo, Y. Suzuki, and T. Ohji, "Reaction-Bonded and Superplastically Sinter-Forged Silicon Nitride-Silicon Carbide Nanocomposites," J. Am. Ceram. Soc., 83 [7] 1816-1818 (2000).
http://doi.org/10.1111/j.1151-2916.2000.tb01471.x
2000-07 3.784 9
23. Y. Suzuki, H. A. Calderon, N. Kondo and T. Ohji, "In Situ Formation of Hexaferrite Magnets within a 3Y-TZP Matrix: La2O3-ZnO-Fe2O3 and BaO-Fe2O3 Systems," J. Am. Ceram. Soc., 83 [6] 1346-1350 (2000).
http://doi.org/10.1111/j.1151-2916.2000.tb01391.x
2000-06 3.784 4
22. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Enhanced Magnetization of 3 mol% Yttria-Doped Zirconia/Barium Hexaferrite by Post-Plastic Deformation," J. Am. Ceram. Soc., 83 [5] 1113-1116 (2000).
http://doi.org/10.1111/j.1151-2916.2000.tb01340.x
2000-05 3.784 5
21. N. Kondo, K. Kaneko, Y. Suzuki, and T. Ohji, "Middle Stage Heat Treatment for Microstructure Control of Reaction-Bonded Silicon Nitride-Silicon Carbide Composite," J. Ceram. Soc. Jpn., 108 [5] 445-448 (2000).
http://doi.org/10.2109/jcersj.108.1257_445
2000-05 1.224 2
20. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Synthesis and Properties of Pressureless-Sintered 3Y-TZP/Ba-M Type Ferrite In Situ Composites," J. Jpn. Soc. Powd. Powd. Metall., 47 [2] 208-212 (2000).
http://doi.org/10.2497/jjspm.47.208
2000-02 N/A N/A
19. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Fabrication of Fine-Grained 3Y-TZP/beta-Al2O3 Composites," J. Jpn. Soc. Powd. Powd. Metall., 46 [12] 1292-1296 (1999).
http://doi.org/10.2497/jjspm.46.1292
1999-12 N/A N/A
18. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Preparation and Characterization of Fine-Grained 3Y-TZP/BaFe12O19 In Situ Composites," J. Am. Ceram. Soc., 82 [9] 2557-2559 (1999).
http://doi.org/10.1111/j.1151-2916.1999.tb02121.x
1999-09 3.784 10
17. T. Ohji, Y. Shigegaki, N. Kondo, Y. Suzuki, "Fracture toughness of multilayer silicon nitride with crack deflection," Mater. Lett., 40 [6] 280-284 (1999).
http://doi.org/10.1016/S0167-577X(99)00090-7
1999-09 3.423 5
16. N. Kondo, Y. Suzuki, T. Ohji, E. Sato, and F. Wakai, "Change in stress, stress sensitivity and activation energy during superplastic deformation of silicon nitride," Mater. Sci. Eng. A, 268 [1-2] 141-146 (1999).
http://doi.org/10.1016/S0921-5093(99)00117-3
1999-08 5.234 10
15. T. Ohji, N. Kondo, Y. Suzuki and K. Hirao, "Grain bridging of highly anisotropic silicon nitride," Mater. Lett., 40 [1] 5-10 (1999).
http://doi.org/10.1016/S0167-577X(99)00039-7
1999-07 3.423 8
14. A. Nakahira, Y. Suzuki, S. Ueno, H. Akamizu, K. Kijima, S. Nishijima, "Effect of plasma treatment on microstructure and surface of glass for plastic-based composite," Sci. Eng. Comp. Mater., 8 [3] 129-136 (1999).
http://doi.org/10.1515/SECM.1999.8.3.129
1999-06 1.295 2
13. N. Kondo, Y. Suzuki, T. Ohji, "Superplastic Sinter-Forging of Silicon Nitride with Anisotropic Microstructure Formation," J. Am. Ceram. Soc., 82 [4] 1067-1069 (1999).
http://doi.org/10.1111/j.1151-2916.1999.tb01876.x
1999-04 3.784 56
12. N. Kondo, T. Ohji, Y. Suzuki, T. Nagano, "Effect of alpha'-phase on superplastic behavior of silicon nitride," J. Ceram. Soc. Jpn., 107 [4] 388-390 (1999).
http://doi.org/10.2109/jcersj.107.388
1999-04 1.224 2
11. N. Kondo, Y. Suzuki, T. Ohji, "Vickers indentation crack in superplastically compressive deformed silicon nitride with highly anisotropic microstructure," J. Ceram. Soc. Jpn., 107 [3] 300-302 (1999).
http://doi.org/10.2109/jcersj.107.300
1999-03 1.224 2

10.
P
K. Niihara and Y. Suzuki, "Strong Monolithic and Composite MoSi2 Materials by Nanostructure Design," Mater. Sci. Eng., A, 261, 6-15 (1999).
Engineering Foundation High Temperature Structural Silicides Conference, HYANNIS, MASSACHUSETTS, MAY 25-29, 1998
http://doi.org/10.1016/S0921-5093(98)01044-2
1999-03 5.234 49
9.
P
Y. Suzuki, P.E.D. Morgan and K. Niihara, "The Improvement in Mechanical Properties of MoSi2 through In Situ Crystallization of Grain Boundary Silica Glass by the Additions of Refractory Oxides," Mater. Sci. Eng. A, 261, 188-195 (1999).
Engineering Foundation High Temperature Structural Silicides Conference, HYANNIS, MASSACHUSETTS, MAY 25-29, 1998
http://doi.org/10.1016/S0921-5093(98)01065-X
1999-03 5.234 8
8. Y. Suzuki, P.E.D. Morgan, and K. Niihara, "Improvement in Mechanical Properties of Powder Processed MoSi2 by the Addition of Sc2O3 and Y2O3," J. Am. Ceram., Soc., 81 [12] 3141-3149 (1998).
http://doi.org/10.1111/j.1151-2916.1998.tb02749.x
1998-12 3.784 18
7. Y. Suzuki, P. E. D. Morgan and K. Niihara, "Use of a high X-ray flux instrument for a mineral: X-ray powder diffraction pattern of CaMg(CO3)2," Powder Diffraction, 13 [4] 216-221 (1998).
http://doi.org/10.1017/S0885715600010137
1998-12 1.570 12
6. Y. Suzuki, T. Sekino, T. Hamasaki, K. Ishizaki and K. Niihara, "In Situ Observation of Discrete Glassy SiO2 Formation and Quantitative Evaluation of Glassy SiO2 in MoSi2 Compacts," Mater. Lett., 37, [3]143-148 (1998).
http://doi.org/10.1016/S0167-577X(98)00084-6
1998-10 3.423 9
5. Y. Suzuki and K. Niihara, "Synthesis and mechanical properties of Mo<5Si3C<1 and Mo<5Si3C<1-based composites," Intermetallics, 6 [1] 7-13 (1998).
http://doi.org/10.1016/S0966-9795(97)00039-3
1998-01? 3.758 38
4. Y. Suzuki, P.E.D. Morgan, T. Sekino and K. Niihara, "Manufacturing nano-diphasic materials from natural dolomite - In-situ observation on nano-phase formation behavior -," J. Am. Ceram. Soc., 80 [11] 2949-2953 (1997).
http://doi.org/10.1111/j.1151-2916.1997.tb03218.x
1997-11 3.784 21
3. Y. Suzuki and K. Niihara, "Effect of SiC Reinforcement on Microstructure and Mechanical Properties of MoSi2," Sci. Eng. Compo. Mater., 6 [2], 85-94 (1997).
http://doi.org/10.1515/SECM.1997.6.2.85
1997-05 1.295 12
2. Y. Suzuki, A. Nakahira, T. Sekino and K. Niihara, "Microstructure and Mechanical Properties of Mo-Si-Al Alloy and Mo-Si-Al/SiC Composite," J. Jpn. Soc. Powd. Powd. Metall., 43 [3] 272-277 (1996).
http://doi.org/10.2497/jjspm.43.272
1996-03 N/A N/A
1. Y. Suzuki, T. Sekino and K. Niihara, "Effects of ZrO2 addition on microstructure and mechanical properties of MoSi2," Scripta Metall. Mater., 33 [1] 69-74 (1995).
http://doi.org/10.1016/0956-716X(95)00093-B
1995-07 5.611 41

(B) Proceedings (Peer-reviewed papers only, in English)
34. H. Abe, K. Kuruma, T.Murakami, M. Takahashi, K. Sato, T. Naka and Y. Suzuki, "Magnetite nanocrystal clusters transformed from ferric precursor and their colloidal magnetorheology," IOP conference series, 479, 012043 (2019).
(The 3rd International Conference on New Material and Chemical Industry, NMCI2018)

https://doi.org/10.1088/1757-899X/479/1/012043
2018-09
33. T. Kawashima, R. S. S. Maki and Y. Suzuki, "Preparation and Microstructure of Electrospun BaTiO3 Fibers," Int. Lett. Chem. Phys. Astro., 62, 5-9 (2015).
(The 3rd Tsukuba International Conference on Materials Science (TICMS2015)
http://doi.org/10.18052/www.scipress.com/ILCPA.62.5
2015-11
32. Y. Yokoyama, Y. Okamoto, N. Bamba, and Y. Suzuki, "Sol-Gel Derived LiNbO3: Its Crystallization Behavior Analyzed by High-Temperature X-ray Diffraction Method," Int. Lett. Chem. Phys. Astro., 62, 1-4 (2015).
(The 3rd Tsukuba International Conference on Materials Science (TICMS2015)
http://doi.org/10.18052/www.scipress.com/ILCPA.62.1
2015-11
31. Y. Suzuki, Y. Okamoto and N. Ishii, "Dye-sensitized solar cells using double-oxide electrodes: a brief review," J. Phys. Conf. Ser., 596, 012001 (2015).
(Tunisia-Japan Symposium: R&D of Energy and Material Sciences for Sustainable Society, November 28–30, 2014, Gammarth, Tunisia)
http://doi.org/10.1088/1742-6596/596/1/012001
2015-04
30. M. Nukunudompanich, S. Chuangchote, J. Wootthikanokkhan, and Y. Suzuki, "TiO2 Nanorods Prepared from Anodic Aluminum Oxide Template and Their Applications in Dye-Sensitized Solar Cells," Int. Lett. Chem. Phys. Astro., 46, 30-36 (2015).
2015-01
29. Y. Nakagoshi and Y. Suzuki, "Morphology control of pseudobrookite-type MgTi2O5 powders by LiF doping," Int. Lett. Chem. Phys. Astro., 46, 37-41 (2015).
2015-01
28. N. Ishii, Y. Okamoto and Y. Suzuki, "Semiconductor MgTiO3, MgTi2O5 and Mg2TiO4 double-oxide electrodes for dye-sensitized solar cells," Int. Lett. Chem. Phys. Astro., 46, 9-15 (2015).
http://doi.org/10.18052/www.scipress.com/ILCPA.46.9
2015-01
27. Y. Suzuki and H. Abe, "Reactive sintering of pseudobrookite-type MgFeNbO5 and MgFeTaO5 ceramics," IOP Conf. Series: Mater. Sci. Eng., 54, 012011 (2014).
(Tsukuba International Conference on Materials Science 2013, Aug. 28-Sep.6 2013, Tsukuba, Japan)

http://doi.org/10.1088/1757-899X/54/1/012011
2014-03
26. Y. Suzuki, "In Situ Processing of Porous MgTi2O5 Ceramics with Pseudo- brookite-Type Structure Toward Third Generation Diesel Particulate Filter Materials," Ceram. Eng. Sci. Proc. 31 [6] 139-146 (2010).
(Proc. of 34th International Conference on Advanced Ceramics and Composites (ICACC2010), Advances in Bioceramics and Porous Ceramics III)
http://doi.org/10.1002/9780470944028.ch14
2010-11
25. Y. Suzuki, "Morphology Control of TiO2-Based Nanomaterials for Sustainable Energy Applications," Proc. Zero-Carbon Energy Kyoto 2009, 39-45 (2010).
http://doi.org/10.1007/978-4-431-99779-5_5
2010
24. K. Asagoe, S. Ngamsinlapasathian, Y. Suzuki*, and S. Yoshikawa, "TiO2-Anatase Nanowire Dispersed Composite Electrode for Dye-Sensitized Solar Cells," J. Phys. Conf. Ser., 61, 1112-1116 (2007).
http://doi.org/doi:10.1088/1742-6596/61/1/220
2007
23. S. Sakulkhaemaruethai, Y. Suzuki, S. Yoshikawa, "Photocatalytic Activity of Titania and Zirconia-Doped Titania Nanocrystals Prepared by Surfactant-Assisted Templating Method," Key Eng. Mater., 317-318, 815-818 (2006).
(Proc. EnCera04, OsaKa, Japan, Oct.31-Nov.3, 2004)
http://doi.org/10.4028/www.scientific.net/KEM.317-318.815
2006-08
22. R. Kawahata and Y. Suzuki, "Mineral Sand as a Low Cost Source of Nanomaterials," Key Eng. Mater., 317-318, 739-742 (2006).
(Proc. EnCera04, OsaKa, Japan, Oct.31-Nov.3, 2004)
2006-08
21. Y. Suzuki, S. Pavasupree, S. Yoshikawa, and R. Kawahata, "Direct Hydrothermal Processing of Long Titanate Nanofibers from Natural Rutile," Key Eng. Mater., 317-318, 243-246 (2006).
(Proc. EnCera04, OsaKa, Japan, Oct.31-Nov.3, 2004)
http://doi.org/10.4028/www.scientific.net/KEM.317-318.243
2006-08
20. Y. Suzuki, P. E. D. Morgan, and S. Yoshikawa, "A New Family of Uniformly Porous Composites with 3-D Network Structure (UPC-3D): Progress and Perspective," Ceram. Trans., 177, 147-151 (2006).
(Proc. 107th Annual Meeting & Exposition of The American Ceramic Society)
http://doi.org/10.1002/9781118408391.ch14
2006-03
19. Y. Suzuki, S. Sakulkhaemaruethai, R. Yoshida and S. Yoshikawa, "Heat Treatment Effect on the Structure of TiO2-Derived Nanotubes Prepared by Hydrothermal Method," Ceram. Trans., 159, 185-192 (2005).
(Proc. 106th ACerS Annual Meeting, 2004)
http://doi.org/10.1002/9781118407158.ch20
2006-3
18. Y. Suzuki, P. E. D. Morgan, and S. Yoshikawa, "A New Family of Uniformly Porous Composites with 3-D Network Structure (UPC-3D): A Porous Al2O3/LaPO4 In Situ Composite," Ceram. Eng. Sci. Proc., 26 [8], 31-35 (2005).
(Proc. Cocoa Beach 2005.)
http://doi.org/10.1002/9780470291283.ch4
2005-01
17. N. Kondo, Y. Suzuki and T. Ohji, "High-Strength Porous Silicon Nitride Fabricated by Partial Sinter-Forging," Key. Eng. Mater., 247, 219-222 (2003).
http://doi.org/10.4028/www.scientific.net/KEM.247.219
2003-08
16. Y. Suzuki, N. Kondo and T. Ohji, "In Situ Synthesis and Microstructure of Dense CaAl4O7 Monolith and CaAl4O7/CaZrO3 Composites," Key Eng. Mater, 206-213, 977-980 (2001).
(Proc. of Euro Ceramics VII)
2001-12
15. Y. Suzuki, H. J. Hwang, N. Kondo and T. Ohji, "Platinum Nano-Dispersion via In Situ Processing - Preparation and Catalytic Property of Porous CaZrO3/MgO/Pt Nanocomposite -," J. Kr. Powd. Metall. Institute, 8 [3] 163-167 (2001).
Link to the paper (no DOI)
2001-09
14. Y. Suzuki, P. E. D. Morgan  and T. Ohji, "Processing and Microstructure of Novel Porous CaZrO3/MgO Composites with 3-D Network Structure," Ceram. Trans., 112, 577-582 (2001). 2001
13. N. Kondo, T. Ohji and Y. Suzuki, "Superplastic Tensile Behavior of Silicon Nitride," Mater. Sci. Forum, 357-359, 183-196 (2001).
(Superplasticity in Advanced Materials - ICSAM-2000)
2001-01
12. Y. Suzuki, P. E. D. Morgan and T. Ohji, "Processing of Porous CaZrO3/MgO/Pt Composites via In Situ Reactions," Ceram. Eng. Sci. Proc., 22 [4] 217-223 (2001).
http://doi.org/10.1002/9780470294703.ch27
2001-01
11. N. Kondo, Y. Suzuki and T. Ohji, "Anisotropic Porous Silicon Nitride Fabricated by Partial Forging Technique," Ceram. Eng. Sci. Proc., 22 [4] 177-182 (2001).
http://doi.org/10.1002/9780470294703.ch22
2001-01
10. N. Kondo, Y. Suzuki and T. Ohji, "Superplastically Sinter-Forged Silicon Nitride," Ceram. Eng. Sci. Proc., 21 [4] 509-514 (2000).
http://doi.org/10.1002/9780470294635.ch60
2000-01
9. Y. Suzuki, P. E. D. Morgan  and T. Ohji, "Super- and Quasiplasticity of Ceramic Nanocomposites in CaO-MgO-ZrO2 System Derived from Natural Dolomite," Proc. Euro MAT 2000, Advances in Mechanical Behaviour, Plasticity and Damage Vol.1, Eds. D. Miannay et al., Elsevier, pp.281-286 (2000).
Euromat 2000
2000-11
8. Y. Suzuki, P. E. D. Morgan  and T. Ohji, "Novel CaZrO3/MgO Porous Composites with 3-D Network Structure," Ceram. Trans., 115, 455-465 (2000). 2000
7. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Processing and Grain Boundary Structure of 3Y-TZP/BaFe12O19 and 3Y-TZP/NaAl11O17 Composites," Ceram. Trans., 118, 363-368 (2000). 2000
6. Y. Inagaki, Y. Shigegaki, N. Kondo, Y. Suzuki, T. Miyajima, and T. Ohji, "Enhanced Fracture Resistance of Highly Anisotropicized Porous Silicon Nitride," Ceram. Trans., 118, 355-362 (2000). 2000
5. Y. Suzuki, T.Yamada, S. Sakakibara and T. Ohji, "Unidirectionally Porous Oxides Prepared Using Eutectic Reactions," Ceram. Eng. Sci. Proc., 21 [4] 19-24 (2000).
http://doi.org/10.1002/9780470294635.ch3
2000-1
4. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "Synthesis and Characterization of Fine-Grained 3Y-TZP/Hexaferrite In Situ Composites," Ceram. Eng. Sci. Proc., 21 [4] 31-38 (2000).
http://doi.org/10.1002/9780470294635.ch5
2000-1
3. Y. Suzuki, P.E.D. Morgan and K. Niihara, "The Improvement in Mechanical Properties of MoSi2 through the Modification of Grain Boundary Phases," Key Eng. Mater., 161-163, 267-270 (1999).
http://doi.org/10.4028/www.scientific.net/KEM.161-163.267
1999
2. Y. Suzuki, A. Nakahira, T. Sekino and K. Niihara, "Microstructure and Mechanical Properties of MoSi2/SiC Composites;" Ceram. Trans., 44, 427-434 (1994). 1994
1. A. Nakahira, T. Sekino, Y. Suzuki, and K. Niihara, "High-Temperature Creep and Deformation Behavior of Al2O3/SiC Nanocomposite," Ann. Chim. Sci. Mat., 18 [5-6] 403-408 (1993).  1993-11

(C) Articles in Japanese
29. 鈴木義和, "新研究室紹介 筑波大学 数理物質科学研究群 鈴木義和研究室,” セラミックス, 56 [8] 556-567 (2021). 2021-08
28. 鈴木義和, "熱分解反応焼結法を用いた多孔質セラミックスの微構造制御に関する研究," 粉体および粉末冶金, 66 [12] 591-597 (2019). https://doi.org/10.2497/jjspm.66.591 2019-12
27. 鈴木義和, "8th AFMD国際会議(ベルギー・ルーヴェン)参加レポート,"セラミックス, 54 [1] 52-53 (2019). 2019-01
26. 鈴木義和, 阿部浩也, "三次元ネットワーク構造を有する多孔質球状顆粒の合成とその場観察,"セラミックス, 53 [11] 794-797 (2018). 2018-11
25. 鈴木義和,, "「無機材料」科目のリニューアルと授業での工夫," セラミックス, 52 [11] 774-777 (2017). 2017-11
24. 鈴木義和, 中越悠太, "擬ブルッカイト構造を有する低熱膨張・環境調和型セラミックス多孔体,"セラミックス, 52 [9] 596-598 (2017). 2017-09
23. 鈴木義和、"福岡東洋陶磁美術館を訪ねて"、セラミックス, 51 [1] 46-47 (2016). 2016-01
22. 鈴木義和, "熱分解反応焼結法を用いた多孔質セラミックスの合成 ―炭酸塩原料の有効利用―" J. Soc. Inorg. Mater. Jpn., 22 [3] 105-109 (2015). 2015-03
21. 鈴木義和, "色素増感太陽電池高効率化に向けたセラミックス関連技術,"セラミックス, 49 [10] 892-894 (2014). 2014-10
20. 鈴木義和、"米軍基地ハイスクールとの高大連携におけるセラミックス体験スクール," セラミックス、48 [11] 698-699 (2013). 2013-11
19. 鈴木義和, "水溶液プロセスを用いた量子ドット増感太陽電池の作製," スマートプロセス学会誌(J. Smart Processing), 1 [5] 204-207 (2012). 2012
18. 鈴木義和、"セラミックス多孔体浄水プラント"、セラミックス, 47 [9]  698-699 (2012). 2012-09
17. 鈴木義和、東野 達、"静電噴霧熱分解法を用いたナノ・マイクロTiO2粒子の合成"、マテリアルインテグレーション、25 [3]  64-70 (2012). 2012-03
16. 鈴木義和、"兵庫陶芸美術館を訪ねて"、セラミックス、46 [5]  436-437 (2011). 2011-05
15. 鈴木義和、"二チタン酸マグネシウム(MgTi2O5)多孔体の開発"、FC Report、28 [4] 130-134 (2010). 2010
14. 鈴木義和、"三次元ネットワーク型多孔質セラミックスの新展開"、セラミックス、45 [10]  834-838 (2010). 2010-10
13. 鈴木義和、"色素増感太陽電池における1次元ナノ材料の電極応用"、セラミックス、45 [7]  528-532 (2010). 2010-07
12. 鈴木義和, "相分離と反応焼結による多孔質セラミックスの作製," 金属, 80 [6] 489-493 (2010). 2010-06
11. 鈴木義和、鈴木 達、"高校におけるセラミックス教育の現場から"、セラミックス、45 [4]  297-302 (2010). 2010-04
10. 鈴木義和、笠井清人、"大叶鉱山 石灰石・ドロマイト採掘場訪問記"、セラミックス、44 [3]  178-179 (2009). 2009-03
9. 鈴木義和、関野 徹、"酸化物ナノチューブの研究開発動向"、マテリアルインテグレーション、18 [1]  3-10 (2005). 2005-01
8. 大司達樹、鈴木義和、揚 建鋒、林 一郎、"高性能フィルター材料の開発"、マテリアルインテグレーション、17 [4]  5-13 (2004). 2004-04
7. 鈴木義和、"タイ研究拠点設立体験記 -COE海外拠点開設への道-"、マテリアルインテグレーション、17 [4]  66-73 (2004). 2004-04
6. 鈴木義和、"わが国のナノテクノロジー・材料技術戦略の動向 -21世紀の産業革命に向けた挑戦-"、マテリアルインテグレーション、16 [2]  1-9 (2003). 2003-02
5. 鈴木義和、"低環境負荷プロセスによる次世代フィルター材料: 高機能多孔質セラミックス"、工業材料, 50 [13] 39-43 (2002). 2002
4. 鈴木義和、"高機能多孔質セラミックスの開発: 低環境負荷プロセスによる次世代材料" 月刊エコインダストリー、7 [7] 23-29 (2002). 2002-07
3. 鈴木義和、"多機能型多孔質材料: -高温脱塵・ガス検知・ガス分解の同時実現の可能性"、マテリアルインテグレーション、 14 [4]  11-15 (2001). 2001-04
2. 鈴木義和、"高温脱塵に適した新規多孔質セラミックス複合材料の開発"、月刊エコインダストリー、5 [10] 5-9 (2000). 2000-10
1. 鈴木義和、新原晧一、"金属間化合物系ナノコンポジットの開発"、マテリアルインテグレーション、13 [11] 13-17 (2000). 2000-11

(D) Books
9. 鈴木義和, "第5章第2節 宇宙・航空用材料の要求特性と開発動向,"pp.264-273、宇宙ビジネス参入の留意点と求められる新技術、新材料、技術情報協会 、2020年4月30日発行
ISBN 978-4-86104-792-3
2020-04
8. 鈴木義和、"19 第3世代低熱膨張フィルター," 熱膨張制御材料の開発と応用、シーエムシー出版、2018年1月25日発行
ISBN 978-4-7813-1316-0
2018-01
7. 鈴木義和、"9.10 ナノワイヤーを活用した研究開発テーマの発掘," (分担執筆) 「技術シーズを活用した研究開発テーマの発掘」、技術情報協会、2013年7月31日発行 2013-07
6. 鈴木義和、"6.3 次世代フィルター"、(分担執筆) 「ナノ空間材料の創製と応用」、フロンティア出版、2009年11月30日発行
ISBN 978-4-902410-17-4
2009-11
5. 鈴木義和、吉川 暹、"23章 酸化物一次元ナノ材料"、(分担執筆) 「化学フロンティア17 新エネルギー最前線」、化学同人、2006年9月30日発行
ISBN 4-7598-0747-0
2006-09
4. 鈴木義和、"5.4 多孔性セラミックスの応用"、pp241-249、(分担執筆) 北川 暹監修、「新時代の多孔性材料とその応用 -ナノサイエンスが作る新材料-」、シーエムシー出版、2004年11月30日発行
ISBN 4-88231-478-9.
2004-11
3. 鈴木義和、「MOT(技術経営)で読むファインセラミックス技術戦略」、日刊工業新聞社、2004年7月31日発行
ISBN4-526-05317-1
2004-07
2. 鈴木義和、"4.8 三次元ネットワーク型多孔質複合材料"、pp164-167 (分担執筆) シナジーセラミックス研究体ファインセラミックス技術研究組合 (編集) 、 産業技術総合研究所シナジーマテリアル研究センター 発行、技報堂出版、2004年3月20日発行
ISBN 4-7655-0134-5
2004-03
1. 鈴木義和、"4.2 高温脱塵に適した新規多孔質セラミックス複合材料の開発"、pp193-200、(分担執筆) 梶原鳴雪監修、「ディーゼル車排ガスの微粒子除去技術」、シーエムシー、2001年4月発行
ISBN 4-88231-313-8.
2001-04

Patents (成立済みのもの)
5. 鈴木義和、吉川暹、"酸化チタン系ナノ生成物およびその製造方法, 特許第3747260号
4. 鈴木義和、"酸化チタン系細線状生成物の製造方法," 特許第3616927号
3. 鈴木 義和、大司 達樹、"ジルコン酸カルシウム/スピネル系複合多孔体及びその製造方法", 特開2003-073179, 特許第3882070号
2. 鈴木 義和, 淡野 正信, 大司 達樹, "バルク状多孔質セラミックスガスセンサーおよび環境浄化装置", 特開2002-243684. 特許第3548798号
1. 鈴木義和, 大司達樹, Peter E. D. Morgan, "ジルコン酸カルシウム/マグネシア系複合多孔体およびその製造方法," 特開2001 - 122675; 特許第3366938号、US-Patent No. 6436861.

Invited talks (招待講演等リスト) 先方Webサイト変更で今後リンク切れが予想されます。ご了承ください。
50. Y. Suzuki, "Environmental friendly and low-cost syntheses of functional oxides with spinel-type structure," Workshop on Advanced Inorganic Materials (WAIM 2019), Liston Hotel Shanghai, Shanghai, China, December 6, 2019. 2019-12
49. Y. Suzuki, K. Fukui, Y. Kamato, "Porous Ceramics Design for Energy and Environment Applications," The 36th International Japan-Korea Seminar on Ceramics (JK Ceramics 36) Torigin Bunka Kaikan, Tottori, Japan, November 20-23, 2019 2019-11
48. Y. Suzuki, "Reactive sintering and particle morphology control of double-oxide based water purification filters,"The 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), Kiev, Ukraine, May 27-30, 2019. 2019-05
47. Y. Suzuki, "Environmental friendly and low-cost syntheses of difficult-to-synthesize, multicomponent and metastable functional oxides," Workshop on Advanced Inorganic Materials (WAIM 2018), Liston Hotel Shanghai, Shanghai, China, September 26-28, 2018. 2018-09
46. 鈴木 義和, "難合成酸化物の低環境負荷・低コスト合成への挑戦: 拡散加速型反応焼結法および形態制御型溶液反応法" 日本セラミックス協会秋季シンポジウム, 名古屋工業大学, 2018.9.5
2018-09
45. Y. Suzuki, "Perovskite Solar Cells on Perovskites"(Symposium T1S3), CMCEE-12 (12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications), Suntec Convention & Exhibition Centre, Singapore, July 22-27, 2018. 2018-07
44. Y. Suzuki, "Reactive sintering and particle morphology control of ceramic water purification filters" (T3S4), CMCEE-12 (12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications), Suntec Convention & Exhibition Centre, Singapore, July 22-27, 2018. 2018-07
43. Y. Suzuki, "Perovskite Solar Cells Inspired by Ceramic Processing" (T4S5), CMCEE-12 (12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications), Suntec Convention & Exhibition Centre, Singapore, July 22-27, 2018. 2018-07
42. Y. Suzuki, "Uniformly Porous Ceramics with 3-D Network Structure (UPC-3D) Prepared by Pyrolytic Reactive Sintering," CIMTEC2018, Perugia, Italy, June 4-8, 2018. 2018-06
41. Y. Suzuki, "Development of Perovskite Solar Cells Inspired by Ceramic Processing," ICACC2018, Daytona Beach, Florida, USA, January 23, 2018. 2018-01
40. Y. Suzuki, "Spherical Porous Granules: In Situ Observation of Formation Behavior Using High-Temperature Confocal Laser-Scanning Microscopy," Workshop on Advanced Inorganic Materials (WAIM 2017), Liston Hotel Shanghai, Shanghai, China, October 19-20, 2017. 2017-10
39. Y. Suzuki, "Self-Organized Formation of Spherical Porous Granules Only by One-Step Heat-Treatment," Workshop on Advanced Inorganic Materials (WAIM 2016), Liston Hotel Shanghai, Shanghai, China, October 16-18, 2016. 2016-10
38. 鈴木義和, "熱分解反応焼結法を用いた多孔質セラミックスの合成―炭酸塩原料の有効利用―," (依頼講演) 無機マテリアル学会 第25回講習会 ものづくりイノベーション-住環境を支える材料と技術-, 工学院大学, 東京都, 2015.12.11
http://www.simj.jp/topics/seminar/lecture.html
2015-12
37. Y. Suzuki, "Pseudobrookite-type Compounds as Potential Functional Materials: Self-Organized Formation of Spherical Porous Granules," IWNMD2015, Yeungnam University, Gyeongbuk, Korea, Dec. 4, 2015..
http://iwnmd2015.blogspot.jp/
2015-12
36. Y. Suzuki, "Self-Organized Formation of Spherical Porous Granules," JK-Ceramics 32, Hotel New Ohtani Nagaoka, Nagaoka, Japan, Nov. 19, 2015.
http://etigo.nagaokaut.ac.jp/jkceramics/
2015-11
35. Y. Suzuki, "Pseudobrookite-type Compounds as Potential Functional Materials," (Keynote) IUMRS-ICA2015, ICC, Jeju, Korea, Oct. 28, 2015.
http://iumrs-icam2015.org/html/
2015-10
34. 鈴木 義和, "熱分解反応焼結法を用いた多孔質セラミックスの合成," (依頼講演) 第5回九州若手セラミックフォーラム&第45回窯業基礎九州懇話会, 通潤山荘, 熊本県, 2015.9.2
http://www.hashishin-lab.jp/content/files/5thKYCF/index.html
2015-09
33. Y. Suzuki, "Green Materials: from water purification filters to self-organized formation of spherical porous granules," MAC2015, Univ. Tsukuba. Tsukuba. Japan, Aug. 31, 2015.
http://www.ims.tsukuba.ac.jp/~suzuki_lab/GMAC2015.html
2015-08
32. Y. Suzuki, "Pseudobrookite-type ceramics: fascinating structure and properties," CJK2015@Hokkaido, Gateaux Kingdom Sapporo, Sapporo, Hokkaido, Japan, Aug. 9, 2015. 2015-08
31. Y. Suzuki, Y. Okamoto and N. Ishii, "Dye-sensitized solar cells using double-oxide electrodes," CMCEE2015, Hyatt Regency, Vancouver, Canada, June 17, 2015.
http://ceramics.org/
2015-06
30. Y. Suzuki, "Pseudobrookite-type Porous Ceramics: Synthesis, Pore structure and Applications," WAIM2015 (Workshop on Advanced Inorganic Materials), Shanghai Institute of Ceramics, Shanghai, China, June 2, 2015. 2015-06
29. Y. Suzuki, "Dye-sensitized solar cells using double-oxide electrodes," (Keynote) TJS2014 (Tunisia-Japan Symposium: R&D on Energy and Materials Sciences for Sustainable Society), El-Mouradi Hotel, Gammarth, Tunisia, Nov. 28, 2014
http://www.tjassst.rnrt.tn/
2014-11
28. Y. Suzuki, "Pseudobrookite-type Ceramics: Synthesis, Microstructure and Applications," The 15th IUMRS-International Conference in Asia (IUMRS-ICA) Fukuoka University, Fukuoka, Japan, Aug. 29, 2014.
http://www.iumrs-ica2014.org/
2014-08
27. Y. Suzuki, "Nanostructured Titania and Titanates: Processing, Microstructure and Renewable Energy Applications," WANP-LCS2014, Joining and Welding Research Institute, Osaka University, Feb. 19, 2014. 2014-02
26. Y. Suzuki, "Pseudobrookite-type Porous Ceramics: Synthesis, Pore structure and Applications," ICACC2014, Hilton Daytona Beach Resort and Ocean Center, Daytona Beach Florida, USA, Jan. 27, 2014.
ICACC2014 web-site
2014-01
25. Y. Suzuki, H. Abe and J.-C. Valmalette, "Reactive Sintering and High-Temperature XRD Study of Pseudobrookite-Type MgFeNbO5 and MgFeTaO5 Ceramics," (Special Lecture) ISEPD2014, Hanoi University of Science and Technology, Hanoi, Vietnam, Jan. 13, 2014.
ISEPD 2014 web-site
2014-01
24. Y. Suzuki, Y. Terada, T. Matsubara and S. Tohno, "Synthesis and characterization of TiO2 powders by electrospray pyrolysis method," IWNMD2013, Yeungnam University, Gyeongsan, Korea, Nov. 29, 2013.
http://iwnmd.blogspot.jp/
2013-11
23. Y. Suzuki, "Nanostructured TiO2 and Related Materials: Processing, Microstructure and Photovoltaic Applications, "The 3rd German-Japan Nanoworkshop - Energby conversion and strorage Univ. Tsukuba. Tsukuba, Japan, Sep. 3, 2013
http://www.ticonfms.tsukuba.ac.jp/nano
2013-09
22. Y. Suzuki, "Advanced porous materials for environmental purification,"1st France-Japan Symposium on Green-Materials and Advanced Characterization (GMAC2013), Le Coupole, Hyères, France, June 27-28, 2013.
http://www.ims.tsukuba.ac.jp/~suzuki_lab/GMAC2013.html
2013-06
21. Y. Suzuki, "Nanostructured TiO2 and Related Materials for Sustainable Energy Applications: Processing, Microstructure and Photovoltaic Applications,"10th Pacific Rim Conference on Ceramic and Glass Technology (PacRIM10), Coronado, San Diego, CA, USA, June 6, 2013 2013-06
20. Y. Suzuki and S. Tohno, "Synthesis and characterization of TiO2 powders by electrospray pyrolysis method," "10th Pacific Rim Conference on Ceramic and Glass Technology (PacRIM10), Coronado, San Diego, CA, USA, June 4, 2013 2013-06
19. Y. Suzuki and S. Tohno, "Synthesis and characterization of Spherical TiO2 powders by electrospray pyrolysis method," The 3rd Asia-Arab Sustainable Energy Forum (3rd AASEF) & the 5th Int. Workshop on SSB Hirosaki, Japan, May 6-8, 2013.
http://www.ssb-foundation.com/press.html
2013-05
18. Y. Suzuki, "Structure Controlled TiO2-Related Nanomaterials via Various Smart Processing," Visual-JW2012, Hotel Hankyu Expo Park, Osaka, Japan, Nov. 28-30, 2012.
http://www.jwri.osaka-u.ac.jp/~conf/Visual-JW2012/
2012-11
17. Y. Suzuki, "Structure Controlled TiO2-Related Nanomaterials: Their Photovoltaic Applications" KJ Ceramics 29, EXCO, Deagu, Korea, Nov. 22, 2012. 2012-11
16. 鈴木義和, "構造制御したチタニア関連ナノ材料の光電変換と太陽電池への応用," 日本化学会第92回春季年会(特別講演)、慶応大学日吉キャンパス、2012.3.25
http://www.csj.jp/nenkai/92haru/
2012-03
15. Y. Suzuki, "Uniformly Porous MgTi2O5 with Narrow Pore-Size Distribution: In Situ Processing, Microstructure and Potential Applications," CJK2011 Meeting, Niigata, Japan, June 3-5, 2011. 2011-06
14. Y. Suzuki, "Uniformly Porous MgTi2O5 with Narrow Pore-Size Distribution: In Situ Processing, Microstructure and Pore Structure," EMSES2011, Wiang Inn Hotel, Chiang Mai, Thailand, May 25-28, 2011. 2011-05
13. Y. Suzuki and B. Pichon, "Titanate Nanowire Thin Films by Spray Layer-by-Layer Assembly Method," Romanian Conference on Advanced Materials: ROCAM 2009, Brasov, Romania, Aug. 25-28, 2009. 2009-08
12. Y. Suzuki, B. Pichon and S. Yoshikawa, "Preparation and Microstructure of Titanate Nanowire Thin Films by Spray Layer-by-Layer Assembly Method," International Symposium on Multifunctional Ceramic Materials Based on Nanotechnology (ISMCN2009), Nagaoka, Niigata, Japan, Feb. 13, 2009, 2009-02
11. Y. Suzuki, B. Pichon and S. Yoshikawa, "Preparation and Microstructure of Titanate Nanotube Thin Films by Layer-by-Layer Assembly Method," IUMRS-ICA2008, Nagoya Congress Center, Nagoya, December 9, 2008. 2008-12
10. 鈴木 義和, ブノワ ピション, 吉川 暹, "酸化物ナノチューブ・ナノワイヤーの光電変換デバイス応用と薄膜化技術の検討,"社団法人 日本材料学会 セラミック材料部門委員会、第129回委員会 講演会、東大阪市, 2008.10.31. 2008-10
9. 鈴木 義和, 淡野 正信, "エネルギー・環境用途に向けた多孔質セラミックス技術の進展," 日本セラミックス協会 2008年秋季シンポジウム、北九州国際会議場, 2008.9.17. 2008-09
8. Y. Suzuki, S. Pavasupree and S. Yoshikawa, "Morphology Control of TiO2-Based Nanomaterials for Sustainable Energy Applications," The 2nd Workshop on Anisotropic Science and Technology of Materials and Devices, Turkish Institute For Industrial Management (TUSSIDE), Gebze, Turkey, June 22-25, 2008, 2008-06
7. Y. Suzuki, S. Pavasupree and S. Yoshikawa, "TiO2-Based Nanomaterials for Sustainable Energy Applications,"ULP-JSPS Joint Forum on “Frontiers in Biology, Chemistry and Physics, Louis Pasteur University, France, May 30, 2008.
2008-05
6. Y. Suzuki, D. D'Elia, C. Bauger, P. Ilbizian, A Rigacci, J.-F. Hochepied, J. Gonzalez-Aguilar, N. Traisnel, L.Fulcheri, and P. Achard, " TiO2-Based Nanomaterials for Sustainable Energy Applications," MS&T07, COBO Center, Detroit, USA, Sep. 18, 2007. 2007-09
5. Y. Suzuki, S. Pavasupree and S. Yoshikawa, "Microstructure and Properties of Long Titanate Nanofibers Prepared from Natural Rutile," 9th Conference and Exposition of the European Ceramic Society, Portoroz, Slovenia, June 20, 2005. 2005-06
4. Y. Suzuki, S. Pavasupree, S. Yoshikawa and R. Kawahata, "Direct Synthesis of TiO2 Anatase Nanofiber/Nanoparticles Composite Powder by Low-Cost & Environmentally Friendly Process," The 3rd EMSES, Thailand, April 6-9, 2005. 2005-04
3. Y. Suzuki, H. J. Hwang, N. Kondo and T. Ohji, "Platinum Nano-Dispersion via In Situ Processing - Preparation and Catalytic Property of Porous CaZrO3/MgO/Pt Nanocomposite -," Int'l Symp. Nano and Nanocomposite Materials, Hanyang Univ., Seoul, Korea, Oct. 5, 2001. 2001-10
2. Y. Suzuki, "Development of Novel Ceramic Composites via In Situ Processing," Asian Symposium of Engineering Ceramics 2001, Tokyo Institute of Technology, Tokyo, Japanl, Sep. 27, 2001. 2001-09
1. Y. Suzuki, M. Awano, N. Kondo and T. Ohji, "In Situ Processing and Microstructural Control of Oxide/Oxide Composites," 7th International Conference on Advanced Materials (ICAM2001), Marriott Casa Magna, Cancun, Q.R., Mexico, Aug. 26-30, 2001. 2001-18
Copyright (c) 2011-2020 Yoshikazu Suzuki Laboratory